1 / 3
Fan cooled Voltage Regulator Housing - XH-M411 — zdjęcie 1
1 / 3

Fan cooled Voltage Regulator Housing - XH-M411

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a housing with fan for a voltage regulator. So, here is one. The housing fits a "XH-M411" (at least that's…

Ocena
0 / 5
Polubienia
2
Pobrania
42
Wydruki
0
Wyświetlenia
256
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I needed a housing with fan for a voltage regulator. So, here is one.

The housing fits a "XH-M411" (at least that's what is printed on the bottom of the circuit board)

Amazon Link: https://www.amazon.de/-/en/Voltage-Regulator-Module-Converter-Display/dp/B0756RZBP2

EAN Code: 0736691480974

Fan size is 3x3cm

The housing is press-fit. You only need some M3 screws to attach the fan.

The photo shows a prototype unit. The downloadable thing has a slot for the fan cable directly next to the fan.

Print Settings

Printer:

RF500

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

Doesn't Matter

Infill:

Doesn't Matter

Filament:

Doesn't Matter Doesn't Matter


Notes:

You may prefer a more heat resistant material as the regulator can become quite hot

Category: Electronics

Tagi