Fan cooled Voltage Regulator Housing - XH-M411
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a housing with fan for a voltage regulator. So, here is one. The housing fits a "XH-M411" (at least that's…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I needed a housing with fan for a voltage regulator. So, here is one.
The housing fits a "XH-M411" (at least that's what is printed on the bottom of the circuit board)
Amazon Link: https://www.amazon.de/-/en/Voltage-Regulator-Module-Converter-Display/dp/B0756RZBP2
EAN Code: 0736691480974
Fan size is 3x3cm
The housing is press-fit. You only need some M3 screws to attach the fan.
The photo shows a prototype unit. The downloadable thing has a slot for the fan cable directly next to the fan.
Print Settings
Printer:
RF500
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Doesn't Matter
Infill:
Doesn't Matter
Filament:
Doesn't Matter Doesn't Matter
Notes:
You may prefer a more heat resistant material as the regulator can become quite hot
Category: Electronics