TBS Source One V4 SMA Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TBS Source One V4 SMA Antenna Mount designed to reduce mechanical vibrations to make a better PID tune possible.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Designed this model to be sturdy and to be printed in PLA or PETG. The goal is to reduce mechanical vibrations on the gyro in order to make a better PID tune. Print without supports in the position the model is in by default.
The default version is 30mm tall (default height of the TBS Source One v4 standoffs). I also added a 25mm tall version. Since the TBS Source One HD has the same frame dimensions, it should fit the HD version as well.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: PETG
Notes:
I printed it with the perimeters set to a high value to "force" a 100% infill for better strength.
Category: R/C Vehicles