Proteus Solder Station Accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are contributions for a already well put together design! I tweaked the articulated joints to be printed with…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These are contributions for a already well put together design!
I tweaked the articulated joints to be printed with TPU with a shore hardness of about 95A for the best holding power.
I also modeled a light fixture, in which I put a small strip of LEDs, soldered about 8 inches of two conductor cable, and filled with epoxy. The cable I ran through the holes on the joints to a buck converter. I would recommend the "Full Round Deflector" to be printed in TPU, the other can be printed with anything.
Finally, I remixed garMo's solder stand to attach to the left side. I'm sure if you want it on the right, you can just mirror it in Tinkercad.
Category: Parts