Proteus Solder Station Accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are contributions for a already well put together design! I tweaked the articulated joints to be printed with…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
These are contributions for a already well put together design!
I tweaked the articulated joints to be printed with TPU with a shore hardness of about 95A for the best holding power.
I also modeled a light fixture, in which I put a small strip of LEDs, soldered about 8 inches of two conductor cable, and filled with epoxy. The cable I ran through the holes on the joints to a buck converter. I would recommend the "Full Round Deflector" to be printed in TPU, the other can be printed with anything.
Finally, I remixed garMo's solder stand to attach to the left side. I'm sure if you want it on the right, you can just mirror it in Tinkercad.
Category: Parts