Perfect 1st layers Improved! Updated calibration prints to complement the original 3x3 bed squares for UBL supporting firmware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix with connecting lines between all parts of the print so its easier to remove from bed.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 647
- Wydruki
- 3
- Wyświetlenia
- 1721
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Don't forget to hit the like button if this helps you :)
Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width)
These prints work seamlessly with the instructions with the original model linked below:
https://www.printables.com/model/213992-perfect-1st-layers-ender-3-v2-ender-3s1-ender-3s1-
Note: When you want to fix a specific spot on the mesh use the STLs which have only the edge corner or edge middle square. Its a 1min print and you can rotate it in slicer to cover any of the 8 outer squares of a 3x3 print. Really good if you have a particular spot you want to perfect and want to iterate quickly and don't want to reprint the entire 3x3 grid.