Sherpa Micro Drive for EVA3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds sherpa micro support to the EVA3 ecosystem.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 345
- Wydruki
- 1
- Wyświetlenia
- 2170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Adds sherpa micro support to the EVA3 ecosystem.
You can use the standard front however assembly will be easier with the modified front included. The only difference is a small cutout to allow assembling the front bolt easier.
Fasteners
This is an insert version and requires M3 x D4.6 x L4 inserts. I source mine from here. Note this is an affiliate link and supports further mods and development work from me :)
2 x M3 insert
2 x M3 cap head bolt (12mm)
6 x M3 cap head bolt (6mm) (5 of these are in the standard parts list for original EVA)
Take a look at the development process on my blog www.3dpandme.com
Support me by buying your sherpa micro parts via my affiliate link or by buying me a beer