Replacement Belt for Bissel Powerforce p/n 1604895
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print it hot in TPU/TPE with random z seam[to avoid tearing under pressure], that's how I did it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Someone in my community threw away a vacuum so I decided to fix it lol.
Print it hot, will be a pain to pop on but should be workable [be sure to get the squared rims of the circular edges of the brush roller into slot or cover will not nest properly], if not scale up to your liking, alternatively you can probably increase the scale by 5/10 mm however once I did get it in place I was pretty happy with the tension, I'll update if I run into any faults or if this needs updating.
Could probably scale to fit other models, guesswork would be needed for this.
VACUUM GO BRRRRRRRRR!!!