Kp3s BMG mounting kit and V6 for 3.0 version and adapter for older version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of an existing mod https://www.thingiverse.com/thing:5317324/files. I reworked it for a BMG dual…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 770
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of an existing mod https://www.thingiverse.com/thing:5317324/files. I reworked it for a BMG dual drive. It includes also the mounting for 3d touch.
You will need some m3 nut and a square m3 nut.
For 3.0 version you won't need to print the carriage mod, and you would go with the Part A for 3.0 version (no carriage needed). For the 1.0 or the titan version of kp3s, you instead will need to print the carriage mod (use a good amount of infill, like 30% or 35%) and the part A for the mod.
Use At last PETG, but would be better in ABS or ASA. If you plan to use the printer in a enclosure, definetly go with ASA or ABS.
Category: 3D Printer Parts