1 / 2
Custom Siphon — zdjęcie 1
1 / 2

Custom Siphon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Siphon for a wash basin when I couldn't buy one at the hardware store during corona.

Ocena
0 / 5
Polubienia
6
Pobrania
33
Wydruki
0
Wyświetlenia
692
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

Because I was introducing it when competing with my soap dish, I kinda have to share this model with you. 

Now you can donload both! Soap dish and a matching siphon!

 

During corona the hardware stores were closed to the public and my siphon was broken. I couldn't find a siphon in the neighborhood or anywhere else so I printed one myself.

It turned out great, even though I had a X shift while printing.

It is completely watertight for over 1,5 years now. I also don't plan on replacing it with a metal one any time soon.

 

It is one of my older projects, when I was still a beginner at CADding for 3D-printing, so I also didn't really care about avoiding supports. This model is therefore not realy optimized for anything - as much as I can remember.

 

I also just put all the model files from my root folder in this upload. I cannot remember the differences between the two clamps.. maybe it is just split for printing.

 

The g-code was generated just NOW. There should also be plenty of room for improvement. but it sure will work. The shell thickness (perimeters) is to ensure watertightness. But I think it might be lowered down to almost 2 perimeters.

Tagi