Open RC Car V3 Chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the OpenRC Car Version 3! I designed an Open RC Car V3 in Autodesk Inventor Pro 2019. Inventor Tutorial about…
- Ocena
- 0 / 5
- Polubienia
- 80
- Pobrania
- 269
- Wydruki
- 0
- Wyświetlenia
- 4904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is the OpenRC Car Version 3!
I designed an Open RC Car V3 in Autodesk Inventor Pro 2019.
Inventor Tutorial about this: https://www.youtube.com/watch?v=6LQ9sx8qdyU
I made a DIY Video: https://www.youtube.com/watch?v=Tgj8doOV3pw
These are the RC materials that you need:
- Receiver and Transmitter (Carson): https://www.conrad.be/p/carson-modellsport-reflex-wheel-start-rc-pistoolzender-24-ghz-aantal-kanalen-3-incl-ontvanger-1920203
- Servo FS90 (120°): https://www.gotron.be/analog-micro-servo-1-3kg-cm-120-rotation.html
- Bruchless Motor 1000KV: https://opencircuit.be/Product/A2212-Brushless-motor-1000KV
- 30A Bruchless ESC + SimonK Software: https://opencircuit.be/Product/30A-Brushless-ESC-met-SimonK-Firmware
- 7,2 V 750 mah Battery (2 cell)
Used bolts, nuts, washers and ball bearings:
- 8x M3-12 Bolts
- 4x M3-19 Bolts
- 12x M3 Nuts
- 8x M3 Washers
- 2x M4-12 Bolts
- 2X M6-12 Bolts
- 2x M6-25 Bolts
- 2x M6 Nuts
- 2x M8-30 Bolts
- 2x M8 Nuts
- 4x 608ZZ Ball Bearings: https://www.123-3d.nl/123-3D-Kogellager-608ZZ-DME00003-i20-t13131.html
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0,15 mm
Infill:
20-30%
Filament: Balco PLA and PLA Flex Blue, Grey and White Post-Printing =============
Printing Details
- 20-30% Infillrnrn- 0,15 mm Layer Heightsrnrn- Printspeed PLA : 40 - 50 mm/srnrn- Printspeed PLA Flex : 30 mm/srnrn- Total print time: 32 Hoursrnrn- Total filament: 156 grams / 52 Meters
Category: R/C Vehicles