Open RC Car V3 Chassis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the OpenRC Car Version 3! I designed an Open RC Car V3 in Autodesk Inventor Pro 2019. Inventor Tutorial about…
- Rating
- 0 / 5
- Likes
- 80
- Downloads
- 269
- Makes
- 0
- Views
- 4,904
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is the OpenRC Car Version 3!
I designed an Open RC Car V3 in Autodesk Inventor Pro 2019.
Inventor Tutorial about this: https://www.youtube.com/watch?v=6LQ9sx8qdyU
I made a DIY Video: https://www.youtube.com/watch?v=Tgj8doOV3pw
These are the RC materials that you need:
- Receiver and Transmitter (Carson): https://www.conrad.be/p/carson-modellsport-reflex-wheel-start-rc-pistoolzender-24-ghz-aantal-kanalen-3-incl-ontvanger-1920203
- Servo FS90 (120°): https://www.gotron.be/analog-micro-servo-1-3kg-cm-120-rotation.html
- Bruchless Motor 1000KV: https://opencircuit.be/Product/A2212-Brushless-motor-1000KV
- 30A Bruchless ESC + SimonK Software: https://opencircuit.be/Product/30A-Brushless-ESC-met-SimonK-Firmware
- 7,2 V 750 mah Battery (2 cell)
Used bolts, nuts, washers and ball bearings:
- 8x M3-12 Bolts
- 4x M3-19 Bolts
- 12x M3 Nuts
- 8x M3 Washers
- 2x M4-12 Bolts
- 2X M6-12 Bolts
- 2x M6-25 Bolts
- 2x M6 Nuts
- 2x M8-30 Bolts
- 2x M8 Nuts
- 4x 608ZZ Ball Bearings: https://www.123-3d.nl/123-3D-Kogellager-608ZZ-DME00003-i20-t13131.html
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0,15 mm
Infill:
20-30%
Filament: Balco PLA and PLA Flex Blue, Grey and White Post-Printing =============
Printing Details
- 20-30% Infillrnrn- 0,15 mm Layer Heightsrnrn- Printspeed PLA : 40 - 50 mm/srnrn- Printspeed PLA Flex : 30 mm/srnrn- Total print time: 32 Hoursrnrn- Total filament: 156 grams / 52 Meters
Category: R/C Vehicles