MakeSmith CNC gear stack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printable file for the MakeSmith CNC gear stack assembly which would otherwise be made of 3 pieces of…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3d printable file for the MakeSmith CNC gear stack assembly which would otherwise be made of 3 pieces of acrylic glued together.
The "Gear Stack" file represents the part as visioned by the MakeSmith team.
I was ask to make the part with a hole slightly smaller than 1/4" so I present to you the following parts.
The "Gear Stack 7_32 hole" file represents the part with a 7/32" hole instead of a space for a 1/4-20 nut.
The "Gear Stack 15_64 hole" file represents the part with a 15/64" hole instead of a space for a 1/4-20 nut.
Instructions
I recommend printing it with support turned on and about 30% infill with 3 layer walls.
Insert a 1/4-20 nut into provided slot and super glue into place.
Category: Tools