MakeSmith CNC gear stack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3d printable file for the MakeSmith CNC gear stack assembly which would otherwise be made of 3 pieces of…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3d printable file for the MakeSmith CNC gear stack assembly which would otherwise be made of 3 pieces of acrylic glued together.
The "Gear Stack" file represents the part as visioned by the MakeSmith team.
I was ask to make the part with a hole slightly smaller than 1/4" so I present to you the following parts.
The "Gear Stack 7_32 hole" file represents the part with a 7/32" hole instead of a space for a 1/4-20 nut.
The "Gear Stack 15_64 hole" file represents the part with a 15/64" hole instead of a space for a 1/4-20 nut.
Instructions
I recommend printing it with support turned on and about 30% infill with 3 layer walls.
Insert a 1/4-20 nut into provided slot and super glue into place.
Category: Tools