Garden hose female to faucet male threaded adapter (3/4GHT - 15/16" faucet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This threaded adapter converts from GHT (F) to faucet (M)
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 487
- Wydruki
- 3
- Wyświetlenia
- 2071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side.
There are two version of the .stl file, one with a built-in supporting ring (break it off after printing), and another without any added supports. The supporting ring is calibrated for a 0.15mm layer height.
A special shout-out to Kipnugget who designed a female faucet to male G3/4 adapter. I messaged him about the reverse configuration, but by the time he replied I had already designed mine. Turns out he built one anyways, so check his out too: Threaded converter G3/4" - M22.
I used the tsmthread4 library to build this in OpenSCAD.