1 / 2
finishing rail feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I small 'feet' that hold scrap pieces of wood or metal and create 'rails' to support items I am painting or staining.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I use scraps of wood or metal as supports to keep pieces that I'm painting, staining / varnishing off the bench. I created these so that they would hold the scraps on edge and create more separation from the bench. made in FreeCAD (file included) just change the pocket sketch to match the scrap width you are using. these are 2" in diameter, with a 1" / 1.25" block that has a 3/16th inch slot pocket. setup to print 4 at a time. 1st upload / design since getting my Mini.