Longboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi all :-) So recently I started my second big project.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi all :-)
So recently I started my second big project. My girlfriend wanted longboard so I take it like Challenge :-D
I borrowed longboard from my friend and start with measuring and then with modeling after week I had prototype and now I have final version witch I want to share with you :-)
I will be prepare more desk for this so you can chose the right one.
I have aluminium foundry so I use 3D printed parts like form for casting, but acc. to simulation XT20 could work too. But I didn't try it - if you will please let me know!
What you need?
Buy:
4x wheel with bearing
2x M8 nut
1X M10x65mm bolt
1x M10 nut
Damper
Bearing plastic
Rod - I used 8mm rod and I created threads at the edges
set nuts and bolts for longboard
I bought cheap longboard and I used all this parts from it :-D (I know it is really stupid)
Make:
2x body part1
2x body part2
4x Ring
1x Desk - for desk I used 13mm plywood
I hope it will make you happy :-)
Print instructions
Rafts: 3
Supports: Doesn't Matter
Resolution: 1,5
Infill: 75% for XT20 (for casting 15% is OK)