Canon lenscap / telescope 1.25" eyepiece adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope.
The hole is 1.25" which seems to be the most common size of eyepieces.
I found that with this design the eyepiece gets a little bit to close to the lens (but that might be depending on the magnification/length of the eyepiece). With a 1-2 cm tube from the hole there would be more options for adjustments...
Remixed from: https://www.thingiverse.com/thing:25845
Print instructions
Category: Camera Print Settings
Printer Brand: RepRap
Printer: Huxley
Rafts: No
Supports: Yes
Resolution: 0.3mm
Infill: 20%
Notes:
Sliced with Slic3r 1.2.9. Default settings for support used.
Slic3r auto-repaired 12 errors and the print came out fine. It's probably fixable in netfabb...