Canon lenscap / telescope 1.25" eyepiece adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 89
- Makes
- 0
- Views
- 1,101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope.
The hole is 1.25" which seems to be the most common size of eyepieces.
I found that with this design the eyepiece gets a little bit to close to the lens (but that might be depending on the magnification/length of the eyepiece). With a 1-2 cm tube from the hole there would be more options for adjustments...
Remixed from: https://www.thingiverse.com/thing:25845
Print instructions
Category: Camera Print Settings
Printer Brand: RepRap
Printer: Huxley
Rafts: No
Supports: Yes
Resolution: 0.3mm
Infill: 20%
Notes:
Sliced with Slic3r 1.2.9. Default settings for support used.
Slic3r auto-repaired 12 errors and the print came out fine. It's probably fixable in netfabb...