Printables Logo Icon Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a somehow stylized model of the new Printables logo Icon as a fridge Magnet
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to combine the new Printables Logo and the Fridge Magnet Contest – so why not?
I created a blank stl file where you can easily insert a negative Volume Cylinder to your liking in accordance with the magnet you have at hand. Maybe it is neccessary to scale the Model in Z-Axis once it lays flat on the bed depending on the height of your Magnet. Mine was 2mm so the stl file is only 2,6 mm high but just scaling it in Z works fine.
I attacehd some 3mf files as well with several common magnet sizes: 5x2mm, 7x3mm, 8x3mm and 20x3mm
Print with supports – just for the magnet hole.
Looks Killer with Prusament Orange ;-)