Chessex 12mm 36 D6 dice holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edited: Made a V2 as it turns out chessex changed dice sizes slightly for their 12mm range. Check comparison pic. V2…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 686
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Edited: Made a V2 as it turns out chessex changed dice sizes slightly for their 12mm range. Check comparison pic. V2 files will work for both the old and new dice size but you will have a VERY hard time squeezing the new dice into v1 stls.
Made to hold 36 of the 12mm chessex dice. Was inspired by this https://www.thingiverse.com/thing:3167519
But the original design had 5 columns and fit 30 dice and there's no good way for me to fit 36 into 5 columns. Also, I wanted an all-in-one solution that didn't require lanyards so I made it a screwtop.
I recommend printing the screw parts in 0.1 resolution although 0.2 did work for me as well but screwing in and out wasn't as smooth as I'd have liked.
Not a remix since I pretty much redid the entire thing in openscad.
Print the top with a support as there's a small pattern on the bed side of it.
Category: Dice