Chessex 12mm 36 D6 dice holder V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Edited: Made a V2 as it turns out chessex changed dice sizes slightly for their 12mm range. Check comparison pic. V2…
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 68
- Makes
- 1
- Views
- 686
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Edited: Made a V2 as it turns out chessex changed dice sizes slightly for their 12mm range. Check comparison pic. V2 files will work for both the old and new dice size but you will have a VERY hard time squeezing the new dice into v1 stls.
Made to hold 36 of the 12mm chessex dice. Was inspired by this https://www.thingiverse.com/thing:3167519
But the original design had 5 columns and fit 30 dice and there's no good way for me to fit 36 into 5 columns. Also, I wanted an all-in-one solution that didn't require lanyards so I made it a screwtop.
I recommend printing the screw parts in 0.1 resolution although 0.2 did work for me as well but screwing in and out wasn't as smooth as I'd have liked.
Not a remix since I pretty much redid the entire thing in openscad.
Print the top with a support as there's a small pattern on the bed side of it.
Category: Dice