Blink XT2 Sync Module Bracket with or without screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the Blink XT2 Power Bracket by Walchek (great design by the way). Instead of hanging the sync module off a…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Based on the Blink XT2 Power Bracket by Walchek (great design by the way). Instead of hanging the sync module off a wall socket I just needed a bracket to mount to a wall or cupboard using screws or a piece of sticky backed velcro (you can probably use double sided tape or even blutack!?!).
I used the bracket without the holes, just because I didn't want to drill into my telephone/network cupboard.
Included in the files are a version with 4mm screw holes and one without.
Two versions are included, one with and one without my logo.
Remember to give my thing a"like", its very much appreciated :)
https://www.buymeacoffee.com/murdrrdbypirates
Thank you
Category: Camera