1 / 1
LEGO Technic Gears
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three simple fridge magnets that are based on LEGO Technic gears
- Ocena
- 2,5 / 5
- Polubienia
- 174
- Pobrania
- 1113
- Wydruki
- 2
- Wyświetlenia
- 5678
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (273)Powiązane
Three fridge magnets that use some STLs I found online.
I adapted the axles so they could accept neodymium magnets so they stick to my fridge.
- Print the axles with black filament.
- Glue 8mm diameter by 3mm thick magnets into the axles.
- Print the gears with grey filament.
- Align and insert the gears onto the axles.
- Stick magnets to your fridge.
- Have fun turning the gears everyone time you walk past your fridge.