Adapter for E3D V6 clone in a printer designed for E3D V5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for E3D V6 clone in a printer designed for E3D V5
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
My Anycubic Mega S has the V5 version as a standard but I wanted to install an all metal V6 clone. Unfortunately these cones are ~7mm shorter than the V5 and I didn't want to move the end sensors down. As temperatures at the top are pretty low an adapter can be printed even in PLA but I chose PETG.
There are 2 files attached. One (rectangular) is specifically for the Anycubic Megas (may also work elsewhere) The other one (round) will fit basically all printers. However >=7mm longer screws are required to attach the hotend.
The groove allows that the hotend with a tie wrap around the clip can still be inserted.
Print parameters:
PETG, 0.3mm layers, 40% cubic infill with double lines, no support