Adapter for E3D V6 clone in a printer designed for E3D V5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for E3D V6 clone in a printer designed for E3D V5
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 1
- Views
- 354
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
My Anycubic Mega S has the V5 version as a standard but I wanted to install an all metal V6 clone. Unfortunately these cones are ~7mm shorter than the V5 and I didn't want to move the end sensors down. As temperatures at the top are pretty low an adapter can be printed even in PLA but I chose PETG.
There are 2 files attached. One (rectangular) is specifically for the Anycubic Megas (may also work elsewhere) The other one (round) will fit basically all printers. However >=7mm longer screws are required to attach the hotend.
The groove allows that the hotend with a tie wrap around the clip can still be inserted.
Print parameters:
PETG, 0.3mm layers, 40% cubic infill with double lines, no support