Drybox mod for ikea 365 10.8l (mount center of spool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This file changes the mounting of the axle to the center instead of the outside.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 2068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This mod adapts the original design by Tobi0892 ( Rigid Dual spool Drybox Ikea 365+ 10.6L food container ) .
I did not like that the axles were mounted on the side.
This mod should change the mounting to the center of each spool.
Two files added, the smallest print can be used if you already made the original, just glue in place and cut the old mount off.
The largest should fit the original dessicant case.
I have not printed it yet. will post pictures when done.
UPDATE 20-06-2022: I printed the first version and noticed a collision between the spool rollers and my updated frame. I replaced the model of the full print with a higher rear mount.