1 / 3
TBS Logo Fatshark Fan Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed Xerpocalypse's fan shroud design to add the Team Blacksheep logo.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I remixed Xerpocalypse's fan shroud design to add the Team Blacksheep logo. The logo can be printed in a different color by adding a filament change 4 or 5 layers before the top at 0.1mm layer height.
This was printed with a 0.25mm nozzle for better detail rendering and accuracy.
On my HDO I don't need the additional spacer designed by Xerpocalypse, the fan spins freely with just my modified part.
Print instructions
Nozzle size 0.25mm