Onda Longa Electric Longboard Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor mount to go along with my battery holder and 42t Onda wheel sprocket. The Onda truck is tapered, so the truck…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Motor mount to go along with my battery holder and 42t Onda wheel sprocket. The Onda truck is tapered, so the truck mount tapers as well to match the truck's contour. There are two holes in the mount for M4 screws, you can use these as pilot holes to drill and tap for M4 screws to screw the mount into place for rigidity. I haven't drilled in the photo yet, but you can see the mount is pretty rigid as-is.
Instructions
Print at 50% or better infill in ABS, PET, Nylon, or something else equally rigid. I tried Taulman 618 but it had more flex than ABS, your milage may vary (I hope that it does, literally).
Category: Sport & Outdoors