85x55 mm business card case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a business card case that I could carry in my photographic shoot bag that would have enough space for quite a…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a business card case that I could carry in my photographic shoot bag that would have enough space for quite a few cards - the case I have only holds about 5 - nowhere near enough as I walk around at an event.
I thought I'd match it to my S7 edge case version 2 ( http://www.thingiverse.com/thing:1933420 ) there is nothing like accessorising apparently.
I also wanted to carry a few of them and see when they were empty, so I carried the Voronoi pattern all the way through. I also create a hex pattern one for good measure.
You will need 3mm diameter by 2mm thick magnets again.
EDIT!!
Version 2 (the ones named "85x55 0r") are the ones with the thumb hole. The 0r means the cards are square cornered. The Moo cards are for the 84x55 5mm rounded corner cards I get from moo.com.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Category: Accessories