Gas bottle holder - Rothenberger MAPP Gas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The gas bottle holder diameter is 74mm, because this is for my work van I needed it to be strong due to the movement…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 272
- Wydruki
- 4
- Wyświetlenia
- 1257
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
The gas bottle holder diameter is 74mm, because this is for my work van I needed it to be strong due to the movement of the vehicle so the infill was set to 40% (print time 31hrs)
But this can easily be reduced if it were to be fitted to a workshop wall ect.
I have uploaded a single version too, both the double and single holder do not require any supports.
Print Settings
Printer:
Anycubic Vyper
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
20% - 40%
Filament:
eSun PLA+
Black
Category: DIY