Anycubic All-Metal Mega SD-Card mount (Cablecc EP-076 for RPi)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert the SD card slot on a All-Metal Mega to a slot for an internal RPi
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I converted my Anycubic Mega Pro to be centered around a Raspberry Pi 4 with Octoprint. I wanted the SD card of the Raspberry Pi accessible without disassembling the printer.
Also the Pi is mounted neatly in the area of the original SD card mount. So I designed a part that allows to use the original SD card mount for a µSD to SD card adapter with a flex cable.
The Adapter used is the Cablecc EP-076
The PCB is just glued to the printed part. Make sure that the excess glue isn't interfering with the SD card mechanism. I used superglue to adhere both parts together.
The part is a bit longer than the original PCB to mechanically support the PCB and reduce the stress on the glue.