Anycubic All-Metal Mega SD-Card mount (Cablecc EP-076 for RPi)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert the SD card slot on a All-Metal Mega to a slot for an internal RPi
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I converted my Anycubic Mega Pro to be centered around a Raspberry Pi 4 with Octoprint. I wanted the SD card of the Raspberry Pi accessible without disassembling the printer.
Also the Pi is mounted neatly in the area of the original SD card mount. So I designed a part that allows to use the original SD card mount for a µSD to SD card adapter with a flex cable.
The Adapter used is the Cablecc EP-076
The PCB is just glued to the printed part. Make sure that the excess glue isn't interfering with the SD card mechanism. I used superglue to adhere both parts together.
The part is a bit longer than the original PCB to mechanically support the PCB and reduce the stress on the glue.