Light Remote Control Holder for Gira System 55
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a remote control, fitted to the frames of Gira's System 55 series. I don't know how many fitting…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for a remote control, fitted to the frames of Gira's System 55 series.
I don't know how many fitting remotes there maay be, because mine is more of a noname product. But in case someone is interessted in this thing, my remote is 47,7mm wide and 18,5mm thick and round at the bottom. Height doesn't matter as the holder is open at the top. The remote cotrol sits loose in the holder, but the holder itself sits tight in the frame with minimal play.
The mounting frame clips in with little noses (do you say that in englisch?) from the back, and can be released with the help of a little screwdriver bending them a little bit inwards.
Print Settings
Printer:
FLSUN Q5
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
10%
Filament:
3DJake PLA (ecoPLA)
White
Notes:
You can use suppoorts, but it shouldn't be needed. Bridging isn't challenging here.
Category: Household