Magnet clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple way to keep any clips you need easily accessible
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 417
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We seem to never have clips around to seal up bags. I figured what better place to keep them when not in use than right on the fridge. I had some 5x3mm magnets from a previous project so I made the model with holes to fit those in. I am also including a version of the model that has no holes so you can attach any magnet you want. The dimensions for each magnet is 50.8x12.7x12.7mm and prints in under 20 minutes.
I printed mine mostly in PETG. I've built a .1mm tolerance into the diameter of the hole to fit the magnets. I was able to push in the magnets and have them be tight enough without the them coming out. The yellow ones are PLA and none of the magnets fit as snug, so I just needed to add some superglue to keep the magnets in place. Both filament types work as intended to seal up bags.
Files included:
- MagnetClip.stl
- MagnetClip_NoHoles.stl
- MagnetClip.3mf
- MagnetClip_0.3mm_PETG_MK3S_19m.gcode
- MagnetClip_5x_0.3mm_PETG_MK3S_1h35m.gcode
- MagnetClip_5x_0.3mm_PLA_MK3S_1h35m.gcode
- MagnetClip.FCStd