Ceiling Track System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mountable track for your ceiling with attachments for different hoses, cords and cables for better shop and garage…
- Ocena
- 5 / 5
- Polubienia
- 138
- Pobrania
- 363
- Wydruki
- 1
- Wyświetlenia
- 3174
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mountable track for your ceiling with attachments for different hoses, cords and cables for better shop and garage organization.
Update: I added a 21cm version of the track which should fit on a Prusa printer.
Print instructions
I'm really excited to share my Modular Ceiling Track System that I've been working on designing for months. I really wanted something that kept the hoses and cords out of the way in my shop, but was easily accessible when I needed them. My solution was something similar to the Rockler Track system, except this one is cheaper and infinitely more expandable.
The system is made up of Tracks, Trollies, and Hooks (Accessories). Here are the included components as well as some important info about them:
- Straight Track: The main track for the system. Print as many as you need to get the length you want. These are about 250mm tall. Printed without support with PLA.
- 90 Degree Track: If you need to make a turn with your track use this. Printed with support with PLA.
- Track Connector Pin: Print 1 Set (2) of these for connecting two tracks together. Printed without support with PLA.
- Track End Stop Pin: Print one of these to place at the end of your track to stop the trollies. Printed without support with PLA.
- Trolly Assembly: Available in 1/4-20 (quarter-20) thread or M6. These are free rolling trollies. Printed without support with PLA.
- Locking Trolly Assembly: Available in 1/4-20 (quarter-20) thread or M6. These lock onto the track wherever you need them, but can also roll freely if needed. Printed with support with PLA.
- 4" Hose Hooks: Available in 1/4-20 (quarter-20) thread or M6. These are great for dust collector hoses and have different options to have auxiliary hooks on the main hook. Printed without support with PETG.
- Eye Hooks: Available in 1/4-20 (quarter-20) thread or M6. A great hook for cable management. Printed without support with PETG.
You will need these parts to complete your track system:
- 608 Bearings
- 1/4-20 or M6 Nuts
- 1/4-20 or M6 Hex Head Bolts
Tinkercad Project Files
I'm also including the original Tinkercad project files so you can remix and come up with your own attachments to the system.
1/4-20 Project Files
Trolly Assembly
Locking Trolly Assembly
4" Hose Hook
Eye Hook
M6 Project Files
Trolly Assembly
Locking Trolly Assembly
4" Hose Hook
Eye Hook