1 / 6
Ender3 Pro/v2 Electronic Box with Raspberry Pi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple electronic box for ender 3 Pro and V2 for people who want to show their expensive board.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 1730
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (43)Powiązane
Update: I re-did the whole remixing in OnShape, the first one is made in tinkercad which is kinda jank.
This model now should fit any kind of pi without having to cut off the IO part,
The BigTreeTech Pi should also mount with 3 screws.
This is a remix of a model on Thingiverse if you want to see the original model see this link
if you need a screen mount see the design I made here
PRINT Settings
- Turn Support on (I use Tree/Organic, normal supports works too.)
- 100% infill
- ABS filament is recommended because PLA or even PETG might deform because of the heat generated by the mainboard and raspberry pi and the enclosed environment if your printer is in an enclosure
(Update: ABS is a must, I have my PETG case deform with the stress from the cables, screws and the heat)
BOM
- 12 M5x8 Bolts
- 12 M5 T Nuts
- 3A Buck Converter
- Fans
- Screws and Nuts for your fans
- Raspberry Pi