1 / 9
Aquila Filament Guide with Bowden Tube for Metal Dual Gear Extruder (Updated with cable guide) — zdjęcie 1
1 / 9

Aquila Filament Guide with Bowden Tube for Metal Dual Gear Extruder (Updated with cable guide)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a filament guide remix for the Voxelab Aquila fitted with a dual gear extruder. now with a cable clip.

Ocena
0 / 5
Polubienia
5
Pobrania
57
Wydruki
0
Wyświetlenia
578
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a filament guide remix for the Voxelab Aquila fitted with a dual gear extruder. Pedrolamas made one for the Ender 3 but the horizontal offset wasn't the same as the Aquila. So I made this remix to fit the Aquila. I hope it helps some of you. Tinkercad link if you want to edit/remix it https://www.tinkercad.com/things/6Ta6pZxMnNb

Print settings 

For the one without cable holder

Material: Pla

Layer height: 0.2 adaptive min layer 0.16 max 0.24

Wall count: 3

Infill: 25% Gyroid

From Pedrolama's post “Recommend print in 0.16 layer height with adaptive layers enabled (if available)”

 

For the one with the cable holder print as shown, I was successful with 0.16 mm layers

Tagi