Aquila Filament Guide with Bowden Tube for Metal Dual Gear Extruder (Updated with cable guide)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a filament guide remix for the Voxelab Aquila fitted with a dual gear extruder. now with a cable clip.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a filament guide remix for the Voxelab Aquila fitted with a dual gear extruder. Pedrolamas made one for the Ender 3 but the horizontal offset wasn't the same as the Aquila. So I made this remix to fit the Aquila. I hope it helps some of you. Tinkercad link if you want to edit/remix it https://www.tinkercad.com/things/6Ta6pZxMnNb
Print settings
For the one without cable holder
Material: Pla
Layer height: 0.2 adaptive min layer 0.16 max 0.24
Wall count: 3
Infill: 25% Gyroid
From Pedrolama's post “Recommend print in 0.16 layer height with adaptive layers enabled (if available)”
For the one with the cable holder print as shown, I was successful with 0.16 mm layers