1 / 1
Mini Guitar
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Guitar Fridge Magnet!
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 942
- Wydruki
- 6
- Wyświetlenia
- 3412
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (1)Kolekcje (120)Powiązane
It's a guitar! You can either put a 10x1mm magnet in the back of the guitar, or some small ones in the hole on the front.
Print with supports, and add in a support blocker on the back.
If you have a dual extruder setup, I'd highly recommend that you print it using that, as it will give much higher quality results.