Vacuum Extensions Holder for Bosch GAS 18V-1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for extension tubes and accessories for the Bosch GAS 18V-1 vacuum.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 436
- Wydruki
- 5
- Wyświetlenia
- 2141
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Wall-mounted holder for two extensions tubes and two accessories for the Bosch GAS 18V-1 vacuum.
The holder has four mounting clamps that let the accessories snap into place. The left clamp has an inner diameter of 40mm, the two clamps in the middle have an inner diameter of 33.2mm while the right clamp has an inner diameter of 30mm.
The diameter sizes are designed to fit the accessories that come with the Bosch GAS 18V-1 vacuum.
The original CAD file is parameterized, so if you need a similar holder with other dimensions, just send me a message.
Because the clamps are forced apart on every insert and removal, I would suggest to print the holder using PETG since it is a bit less stiff compared to PLA.