Mirror holder for mountain bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The holder is basically an adapter between the FOX seatpoast actuator and the Zefal MR-K12 mirror.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I was always annoyed that I couldn't see the traffic behind me when cycling on sections of public roads while riding my mountain bike. The cockpit didn't allow to mount a small mirror and I didn't want to install a large mirror with a large arm for it hinders going off-road.
My bike has a telescopic seatpost from FOX, whose actuation lever is located under the left brake lever. Therefore, I bought a small rear view mirror (Zefal MR-K12 ) and constructed an adapter that positions the mirror under the lever for the seatpost.
The adapter consists of two parts. The actual holder and a plate (which holds an M4 nut) as a counterpart from above. Both parts are connected by an M4 screw (thread length 25mm).
I printed both parts on a Prusa mini+ in PLA (infill 50%).