Liczymy pasujące modele…
The Woom bikes don't have the usual stem where the towing rope could hold onto – with this puck you can tow them anyways without the need to use a carabiner hook to fix the rope. You will need three zip ties to fasten it: two small zip…
Das Original ist bei einem Fahrradsturz gebrochen. Druck in PETG mit 100% Infill. Model flach auf der Druckplatte mit Support drucken, dann ergibt sich die maximale Festigkeit.
You need to disassemble the original enclosure and extract the mirror which is glued into the original housing using some double-sides foam tape.
A replacement foot/bumper designed for the Zefal HP road bike pump. It has been tested on the HP version, but it looks like it will also fit the modern HPX model. Based on part model number HPX (#73xx) from the Zefal website. This is a…
I have made a holder for my Zefal ZCross pump for my Orbea Occam. I made it due to oversize central tube with a short size with the pedals to place the pump. The holder is mounted directly on the bottle cage. There are three versions,…
Basic Handle for a Zefal High Pressure Sport-G floor pump. No supports needed. I originally printed a handle with a 20 degree sweep similar to the original handle. After using the printed handle several times, I felt that a straight…
Simple cap for the Zefal Magnum. Slides on, stays put. It's that simple. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: Doesn't Matter Filament: 3DKast PLA Silver Notes: Print with…
Use this cap to protect things in your bag from being poked! This is to use with Zefal's tubless repair prong for tubeless slugs/bacon strips. Print with 5+ perimeters, PLA
This is the replacement of the upper end of a Zefal Sulki foot pump Use the old screws to fix on the body. It may fit to other Zefal pumps with body 32mm diameter. print vertically upside down. no supports needed.
Introduction This model is a holder for a bike pump. With this model you can travel anywhere with your pump attached to your bike. It is compatible with some Zefal pumps, but properly other pumps too (if not, the Fusion file is uploadet…
Keep your bike maintenance station or workshop organized and spotless! This holder is specifically designed to fit Zefal chain lube bottles (such as the "Extra Wet" series) and various Loctite-style glue bottles . The "Clean Workshop"…
My Zefal U-Lock holder broke due to overscrewing it, so I designed a new one. It's not pretty, but it does the trick ;) Original mount: Mounting hardware for C8 and C9 Locks My Zefal u-lock: K-TRAZ U17 CABLE - U-lock with cable Printed…
My Zefal U-Lock holder broke due to overscrewing it, so I designed a new one. It's not pretty, but it does the trick ;) Original mount: Mounting hardware for C8 and C9 Locks My Zefal u-lock: K-TRAZ U17 CABLE - U-lock with cable Printed…
The Woom bikes don't have the usual stem where the towing rope could hold onto – with this puck you can tow them anyways without the need to use a carabiner hook to fix the rope. You will need three zip ties to fasten it: two small zip…
This adaptor slides onto the shaft of the pump, and sits under the handle to extend the overall length of the pump. This is useful if your pump is slightly too short to properly attach to the pump peg on the frame. This was specifically…
Replacement parts for a bicycle mirror, loosely modelled after a Zefal model. The actual backside of the mirror is not included but the original should have a 12mm ball socket for attachment. The parts include a proposed orientation and…
This is a clean, simple, and effective mounting bracket designed to dock the Zefal Supervision F1500 bike light onto an IKEA SKÅDIS pegboard system. It is perfect for bikepackers, daily commuters ("vélotaf"), or anyone looking to organize…
My legs were touching the saddle bag while biking so I made this adapter to put it out of reach. Printed with Bambulab PETG-CF, fuzzy skin on the flat side to help adherence between the piece and the saddle bag. Made two holes to add zip…
After my bike fall to the side, the mirror cover broke. Here a replacement for the cover. Printed in TPEG 0.2 with supports (print as it is in the 3mf file for strengh)
Filament: Flexibel, Shorehärte 94A Druckeinstellungen: 0.2 Standard
