1 / 4
Zefal Supervision F1500 Bike Light Mount for IKEA SKÅDIS Pegboard — zdjęcie 1
1 / 4

Zefal Supervision F1500 Bike Light Mount for IKEA SKÅDIS Pegboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Docks your Zefal Supervision F1500 bike light perfectly on an IKEA SKÅDIS board. Organize your gear wall.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This is a clean, simple, and effective mounting bracket designed to dock the Zefal Supervision F1500 bike light onto an IKEA SKÅDIS pegboard system.

It is perfect for bikepackers, daily commuters ("vélotaf"), or anyone looking to organize their gear wall in a garage or workshop. The mount holds the light securely using its native interface, allowing for easy placement and removal without any fumbling.

Compatibility Note: This bracket was specifically designed for the Zefal Supervision F1500. However, it utilizes a standard mounting rail interface. It might be compatible with other bike lights or tools that share this same mounting point.

I've been using this setup daily, and it works flawlessly.

I have a non-commercial, "help others" approach, so I provide this design for free. If you print it and it helps you, please consider sharing a photo of your setup!


Print settings:

I've printedthis using Prusa's 'Structural' profile in PrusaSlicer for a robust part. PETG is recommended over PLA for its durability and flexibility, especially for the pegs.

  • Material: PETG (Recommended, for peg flexibility and heat resistance).

  • Print Orientation: Vertical, with the U-slot opening facing downwardsThis minimizes overhangs.

  • Layer Height: 0.2mm (Structural profile is ideal).

  • Infill: 15%, Gyroid. (My usual setting, it provides excellent strength without excessive weight).

  • Perimeters (Walls): 3 or 4 are sufficient for a solid build.

  • Supports: YES, required. Organic or tree supports are highly recommended for the pegs.

Tagi