Zefal HP/HPX Pump Protection Foot Mount Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement foot/mount/bumper/protector for the Zefal HP and HPX road bike pumps. Plastic piece in contact with frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
A replacement foot/bumper designed for the Zefal HP road bike pump. It has been tested on the HP version, but it looks like it will also fit the modern HPX model. Based on part model number HPX (#73xx) from the Zefal website.
This is a snug fit part, and will require some encouragement to slide into the pump bracket. Don't want to lose the pump from a bump.
Recommend printing flat, with brim, 100% infill, 0.8/0.10mm layer height. Use supports so the round base comes out as round as possible. Print on a slow, quality preset - this is a snug fit precision part. PLA seems to be ok strength wise.