Ender 5 (Pro) PSU/Power supply adapter for BTT SKR E3 Turbo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought the BTT (BigTreeTech) SKR E3 Turbo motherboard for my Ender 5 Pro. I noticed that this board is bigger than…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I bought the BTT (BigTreeTech) SKR E3 Turbo motherboard for my Ender 5 Pro. I noticed that this board is bigger than all the other Ender 3 compatible ones (Creality 8-bit and 32-bit ones, SKR E3 mini, EZBoard, etc.). So, the easier fix to make it fit inside the Ender 5 housing is moving the PSU a little to the left.
With four units of this adapter you can place the PSU inside the Ender 5 housing and leave enough room for this SKR E3 Turbo board, giving your Ender 5 a huge upgrade with double extruder and LPC1769 performance! Without affecting the PSU cooling window!
You have to glue 4 M8 sized bolts with Locktite to one side of these adapters. That side will be facing the PSU, so the screw that comes from outside the Ender 5 housing can hold the PSU perfectly.
NOTE: in case you don't know where the PSU screws are, they are under the Ender 5 (Pro) sticker on top of the housing. Just make a hole for each one or remove the whole sticky mat: https://imgur.com/h5JcAry
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%
Filament: Fervi PLA
Black
Notes:
Nozzle 0.4. Glue M8 bolts with Locktite to one side (the one facing the PSU).
Category: 3D Printer Parts