RatRig V-Core 3 Emergency Stop Button Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to install an 22-mm emergency stop button on a V-Core 3. Should fit 300mm, 400mm and 500mm versions.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 999
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Print on the side with a brim.
Use 4 perimeters, 25% infill.
Use 2 M6x12 screws and M6 T 3030 nuts to mount.
If you are using Klipper, you can wire the button to the board (e.g to an unused endstop socket) and use Klipper's gcode_button to execute action_emergency_stop().
A more radical option is to wire the PSU input or output through the button, however this will also cut off the hotend fan, potentially causing a clog. Mains wiring can be dangerous, do it on your own risk.
Button thread is 22mm in diameter.
