1 / 5
Large Front bumper for WLtoys K989, 284131, K979, K969, K999
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a larger bumper than the stock one to protect your front drive train while driving your car fast.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 157
- Wydruki
- 2
- Wyświetlenia
- 977
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (31)Powiązane
This is a larger bumper than the stock one to protect your front drive train while driving your car fast.
It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact.
This is compatible with WLtoys K989, 284131, K979, K969, K999, and certainly older P929 and P939.
Print the two small parts, then add a piece of foam (about 5mm thick), then gently tighten the two pieces with 4 M2x10mm screws.
Print settings :
- layer height : 0.1mm is recommended
- speed : 80-120mm/s
- nozzle : 0.2 or 0.4
- no support needed