1 / 4
Like Counter Fridge Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Would you like to find out which photo gets the most likes from your quests?
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
Would you like to find out which photo gets the most likes from your quests? Then print out Like Counters and hang it on your refrigerator together with photos!
How-To-Print:
- Recommended Layer Height: 0,1mm for number wheels / 0,2mm for housing and cover
- Support: No
- Change the filament color while printing number wheels and cover.
Montage:
- Glue 8x3mm neodymium magnets into their slots.
- Insert number wheels to their axes.
- Check if it works well.
- Glue cover on housing (Be careful, glue must not touch wheels).
How-To Change Filament Color:
ALL CUBE3DWORLD designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.
To legally sell them, you may obtain my permission with monthly Club Memberships.