1 / 2
X-Carriage prusa i3, 31mm spacing (for nema 17) with 4 bearing.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the X-carriage to mount a Nema 17 (using the back screws) with 4 bearings (more stability). Should work, but…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I remixed the X-carriage to mount a Nema 17 (using the back screws) with 4 bearings (more stability).
Should work, but I'm still waiting for my MK8 in order to test everything out.
Instructions
Print standing (for more stength in the bearing clamps), I used 0.3mm layer height, no supports needed.
Category: 3D Printer Extruders